Removing The Cf Card - Canon EOS 10D Digital Instruction Manual

Removing the CF Card

•
While the access lamp is blinking ("
the LCD panel), do not:
• Shake or hit the camera.
• Open the CF card slot cover.
• Remove the battery.
This is to prevent damage to the image data, CF card, or camera.
•
The menu cannot be used during image processing after image capture and while the
image is being recorded onto the CF card (access lamp blinks). If you press the
< > or < > button during this time, "
•
If a CF card is used for the first time or "
"Formatting a CF Card" on page 119 to format the card.
•
Do not use a low-capacity CF card. If the image file size is large, the CF card may not
be able to save the image.
•
A microdrive is a recording medium using a hard disk. It has a large capacity and the
price per megabyte is low. However, compared to a CF card equipped with a flash
memory, it is vulnerable to vibration and physical shock. If you use a microdrive, be
careful not to subject the camera to vibration, shake, or physical shock while it is
recording or displaying images.
Open the cover.
1
•
Set the < > switch to <
•
Check that the "
LCD panel.
•
Make sure the access lamp is off (→p.15), and
open the cover.
Remove the CF card.
2
•
Press the Eject button.
The CF card is ejected.
s
•
Close the cover.
" is displayed in the viewfinder and on
" will be displayed on the LCD monitor.
" is displayed on the LCD panel, see
Installing and Removing the CF Card
>.
" message is not shown on the
1
29