Canon EOS 10D Digital Instruction Manual page 130

Printing Options
Trimming frame
•
When a BJ printer is connected to the camera, the color of the trimming frame will not
change regardless of the trimming frame size (magnification).
•
If you have set [Trimming] and then change the [Style] ([Image], [Borders]), the
[Readjust trimming] message will appear on the LCD monitor. Set [Trimming] again
or reset the [Style] settings.
•
The [Trimming] setting will be canceled if you do any of the following:
• Press the <
• Set [Trimming] for another image.
• Exit from direct printing.
(Turn the <
• Change the trimming frame to a size bigger than the maximum size.
•
When setting [Trimming], use the camera's LCD monitor. If you use a TV monitor
connected to the camera with a video cable, the trimming frame may not display
correctly.
The shape of the trimming frame is determined by the [Image] and [Borders] settings.
130
•
Moving the trimming frame
•
Turn the <
horizontally or vertically.
•
To move the trimming frame vertically, press the
<
turn the <
button, the direction changes.
•
The moving direction is indicated by the <
<
frame.
•
Rotating the trimming frame
•
Press the <
frame. The button toggles between the vertical
and horizontal trimming orientation.
Exit the trimming screen.
3
•
Press <
The trimming screen will quit and the direct printing
s
screen will appear.
•
On the upper left, you can check the printing area of
the image.
> button to quit the [Trimming] setting.
> switch to < > or press the shutter button halfway.)
> dial to move the trimming frame
> button to change the moving direction, then
> dial. Each time you press the <
> arrows displayed outside the trimming
> button to rotate the trimming
>.
>
> or