Calibrating The Sensor Pen - Brother DreamWeaver„ VQ3000 Operation Manual

USING THE SENSOR PEN

Calibrating the Sensor Pen

Before using the sensor pen for the first time be
sure to calibrate it to the screen. Doing so allows
the machine to learn the position you usually hold
a pen.
Hold the sensor pen at a comfortable angle and
then calibrate the machine according to the
procedure below.
Be sure to keep the sensor pen at the same angle
while calibrating the first and second points.
a
Press .
→ The settings screen appears.
b
Display page 6 of the settings screen.
c
Press while connecting the sensor
pen to the machine.
→ The Sensor Function Calibration screen appears.
B-62
d
Touch the first point of green dot marking
using the sensor pen.
* Touch on the needle plate cover.
a Needle plate cover
e
Touch the second point of center of
cross-hair using the sensor pen.
* Touch on the point in the illustrations.
a Flat bed attachment