Useful Functions; Automatic Thread Cutting - Brother DreamWeaver„ VQ3000 Operation Manual

USEFUL FUNCTIONS

Automatic Thread Cutting

After selecting a stitch pattern, turn on the
automatic thread cutting function before sewing,
and the machine will automatically sew
reinforcement stitches (or reverse stitches,
depending on the stitch pattern) at the beginning
and end of sewing, and trim the threads at the end
of sewing. This function is useful when sewing
buttonholes and bar tacks.
a
Select a stitch pattern.
b
Press to set the automatic thread
cutting function.
→ The key will display as
c
d
.
Set the fabric in the start position and start
sewing.
a Reverse stitches (or reinforcement stitches)
→ The machine will automatically sew reverse stitches
(or reinforcement stitches) and then continue
sewing.
Memo
• If you press the "Start/Stop" button to
pause sewing, press the same button again
to continue. The beginning
reverse/reinforcement stitches will not be
sewn again.
Press the "Reverse Stitch" button or
"Reinforcement Stitch" button.
a Reverse stitches (or reinforcement stitches)
→ The machine will sew reverse stitches (or
reinforcement stitches), then trim the thread.
Memo
• To turn off the automatic thread cutting
function, press
as .

USEFUL FUNCTIONS

again, so it appears
Sewing S-13
S
1