Appliqué - Brother DreamWeaver„ VQ3000 Operation Manual

SEWING THE STITCHES
■ Appliqué
a
Trace the pattern onto the appliqué fabric
and then cut around it, leaving a 3 mm to
5 mm (approx. 1/8 inch to 3/16 inch) seam
allowance.
a Seam allowance: 3 mm to 5 mm
(approx. 1/8 inch to 3/16 inch)
b
Place a piece of stabilizer cut to the finished
size of the appliqué design onto the fabric,
and then fold over the seam margin using
an iron. Clip curves when necessary.
c
Turn the appliqué over, and attach the
stabilizer with basting pins or a basting
stitch.
d
Select and attach presser foot "J".
S-38
e
Use the quilting appliqué stitch to attach
the appliqué. Sew around the edge while
dropping the needle as close to the edge as
possible.
a Appliqué
b Needle drop position
CAUTION
• Be careful that the needle does not strike a
basting pin during sewing. Striking a pin can
cause the needle to break, resulting in injury.