Convenient Sewing Features By Using The Sensor Pen; Connecting The Sensor Pen - Brother DreamWeaver„ VQ3000 Operation Manual

CONVENIENT SEWING FEATURES BY USING THE
SENSOR PEN
By using the sensor pen, you have the option of
four separate functions
• Setting the guideline as a reference for your
sewing position.
• Set the needle position of straight stitch.
• Adjust the width and "L/R SHIFT" position of a
zigzag stitch.
• Set the ending point of a stitch pattern sequence.
CAUTION
• The guideline marker is a laser; therefore, do
not stare at the laser light directly. Otherwise
it may cause blindness.
Note
• When the guideline does not appear clearly,
set the brightness of the machine light
dimmer to see them clearly.
Refer to "Using the Machine Setting Mode
Key" on page B-25.

CONNECTING THE SENSOR PEN

When connecting the sensor pen to the machine, make sure that the arrow on the sensor pen connector
faces up and that the connector is firmly inserted into the jack.
a Sensor pen jack
b Sensor pen connector

CONVENIENT SEWING FEATURES BY USING THE SENSOR PEN

a When specifying the end point of your sewing, this
function adjusts your pattern or stitch so that you
end up with a complete design.
b It is easy to set the pattern width and position.
• When connecting the sensor pen, make sure
that the arrow on the sensor pen connector
faces up, otherwise the connector pins will not
align correctly and the connector will be
damaged.
• When connecting or disconnecting the sensor
pen, grab the connector, and then slowly push
it straight in or pull it straight out.
• When disconnecting the sensor pen from the
machine, do not pull on the cord, otherwise
the sensor pen may be damaged.
CAUTION
Basic operations B-59
B
2