Table of Contents
Advertisement
Sewing
c
Press
on the screen.
You get
, and the machine is set for
automatic thread cutting and automatic reverse/
reinforcement stitching.
• To turn automatic thread cutting off, press
d
Set the fabric in place, and press the "Start/Stop"
button once.
Stitching will begin after reverse stitches (or
reinforcement stitches) are sewn automatically.
e
Once you have reached the end of the stitching, press
(Reverse stitch button) or
button).
If stitching, such as buttonholes and bar tacking, that
includes reinforcement stitching has been selected, this
operation is unnecessary.
After the reverse stitching (or reinforcement stitching)
has been done, the machine stops, and the threads
are cut.
1
2
3
Automatic presser foot lowering function
By setting the machine to automatically raise and lower the
presser foot, sewing operations can be performed more
smoothly.
a
Press
to select the settings. (page 15)
1
2
3
1 When set to [ON], pressing the "Start/Stop" button or
depressing the foot controller automatically lowers the
presser foot (if it is raised) before starting to sew.
2 When set to [ON], the presser foot is raised when
stopping sewing.
The presser foot is raised to the height specified for
[Presser Foot Height] (page 2 of the settings screen).
When the pivot setting is selected, the presser foot is
raised to the height specified for [Pivoting Height] (page
3 of the settings screen).
3 When set to [ON], pressing the
button) automatically lowers the presser foot (if it is
raised) before cutting the thread. The presser foot will be
raised after the thread is cut.
36
.
(Reinforcement stitch
1 The point where the "Start/
Stop" button was pressed.
2 The point where
(Reverse stitch button) or
(Reinforcement stitch
button) was pressed.
3 The threads are cut here.
(Thread cutter
Automatic fabric sensor system (Automatic
presser foot pressure)
The thickness of the fabric is automatically detected and the
presser foot pressure is automatically adjusted with an internal
sensor while sewing, to insure that your fabric is fed smoothly.
The fabric sensor system works continuously while sewing.
This function is useful for sewing heavyweight fabrics, or
quilting (page 15).
a
Press
, and then set [Automatic Fabric Sensor
System] to [ON]. (page 15)
Advertisement
Table of Contents
