Optional Specifications
Initialization
There are three ways that the printer can be initialized (returned to
a fixed set of conditions):
Hardware initialization
Software initialization
Panel initialization
These three kinds of initialization have slightly different effects.
Software and panel initialization do not initialize the printer
mechanism or clear the user-defined character set. Also, software
initialization does not clear the data buffer of all text.
Default settings
The table below shows the default conditions that take effect
when the printer is initialized.
Top-of-form position
Line spacing
Vertical tab positions
Font selection
User-defined
Characters
Character pitch
Technical Specifications
7-16
When the power is turned on or when the
printer receives an INIT signal from the
parallel interface (pin 31 goes LOW).
When software sends the ESC @ (initialize
the printer) command.
PAUSE
When the
ALT
button held down.
Current paper position
Cleared
Reset to the current panel setting
Hardware: cleared
Software: deselected only
Reset to the current panel setting
button is pushed with the
Default condition
I
I