Epson 1170 User Manual page 84

CAUTION:
carbon paper, or labels in the single-bin cut-sheet feeder.
Insert up to 50 sheets of paper along the left paper guide.
5.
Adjust the position of the right paper guide so that it matches
6.
your paper's width. Make sure the position of the guide allows
the paper to move up and down freely.
Push the paper-set levers back to clamp the paper against the
7.
guide rollers.
Attach the stacker-support wires to the edge guides of the
8.
paper guide. Then place the notches on the paper guide straight
down over the mounting posts on the printer to reinstall it.
Slide the edge guides to the middle of your paper.
You can still insert single sheets using the rear paper guide or the
front paper slot. The cut-sheet feeder automatically loads paper
when you send print data to the printer (as long as the PAUSE light
is not lit). You can also load paper from the cut-sheet feeder by
pressing the LOAD/EJECT button.
Do not use envelopes multi-part forms,
Using the Printer Options
Cut-Sheet Feeder
4-5