Epson 1170 User Manual page 25

Testing the Printer
Move the left edge guide until it locks in place next to the
3.
arrow guide mark. Then adjust the right edge guide to match
the width of your paper.
CAUTION:
(8
wide for the LQ-1170; otherwise the print head prints
directly onto the platen.
Insert a sheet of paper down between the edge guides until it
4.
meets resistance. After about two seconds, the printer loads the
paper automatically and starts the self test.
1-12 Setting Up the Printer
Run the self test using paper at least
LQ-870
or mm
360 (14
mm
210
inches)
-