Epson 1170 User Manual page 96

2.
Remove the screws from the interface cover and remove it.
3. Insert the interface card into the slots on both sides of the
interface compartment. Slide the card in firmly until the
connector at the rear of the interface card fits into the printer's
internal socket.
4.
Replace the cover and secure the screws to complete
installation,
Note:
If the original screws do not fit, use the screws provided
in the interface package.
To remove the interface card, first unplug the power cord; then
perform the reverse of the steps above.
Using the Printer Options
Interface Card
4-17