8.
Attach the remaining front caster to the server using two more screws supplied in the plastic
pouch.
9.
Remove the rear cushion at the rear of the server. Do not remove the remaining cushions.
10. Mount the two rear casters to the server using the remaining four screws.
11. Obtain the plywood ramp from the wheel kit.
12. The ramp has two predrilled holes
using the two screws taped to the ramp.
Figure 2-10 Attaching the Ramp to the Pallet
13. Remove the two side cushions from the server,
so that it lays flat on the pallet.
(Figure
2-10). Attach the ramp to the edge of the pallet
(Figure
2-11) and unfold the cardboard tray
Installing the Wheel Kit
45