Standalone And To-Be-Racked Systems; Rack-Mount System Installation; Securing The Cabinet - HP 9000 Integrity rp8440 Installation Manual

Figure 2-4 Securing the Cabinet

Standalone and To-Be-Racked Systems

Servers shipped in a stand-alone or to-be-racked configuration must have the core I/O handles
and the PCI towel bars attached at system installation. Obtain and install the core I/O handles
and PCI towel bars from the accessory kit A6093-04046. The towel bars and handles are the same
part. Refer to service note A6093A-11. This is the same accessory kit used for the HP 9000 rp8400
server.

Rack-Mount System Installation

Information is available to help with rack-mounting the server. This list is intended to guide the
HP Installation Specialist to the documentation that has been written by the Rack and Power
team.
The external Web site is:
The internal Web site is:
http://h18004.www1.hp.com/products/servers/proliantstorage/bcs-rackandpower/index.html
The web site is organized into the following topics:
Racks & Accessories
• Rack System/E
• Rack accessories
• Universal mounting kits
Power Management
• PDUs
• Cordsets
• Rackmounted UPS
System Management
• Console switches
• Flat panel/keyboards
http://www.hp.com/racksolutions
Standalone and To-Be-Racked Systems 39