11. A screen similar to
Figure 2-35 The ls Command Screen
To return to the MP Main menu, enter ma.
To exit the MP, enter x at the MP Main Menu.
Accessing the Management Processor via a Web Browser
Web browser access is an embedded feature of the management processor (MP). The Web browser
enables access to the server via the LAN port on the core I/O card. MP configuration must be
done from an ASCII console.
NOTE:
The MP has a separate LAN port from the system LAN port. It requires a separate LAN
drop, IP address, and networking information from that of the port used by HP-UX.
Before starting this procedure, gather the following information:
•
IP address for the MP LAN
•
Subnet mask
•
Gateway address
•
Host name (this is used when messages are logged or printed)
To configure the LAN port for a Web browser, perform the following steps:
1.
Connect to the MP using a serial connection.
2.
Configure the MP LAN. See
3.
Type cmto enter the Command Menu.
4.
Type sa at the MP:CM> prompt to display and set MP remote access.
76
Installing the System
Figure 2-35
will display allowing verification of the settings.
"Configuring LAN Information for the
MP".