Table of Contents
Advertisement
Beeper Indications
Standard Use
Beeper Sequence
1 Beep - short high tone
4 Beeps - short high tone
4 Beeps - long low tone
Parameter Menu Scanning
1 Beep - short high tone
1 Beep - lo/hi tone
1 Beep - hi/lo tone
1 Beep - hi/lo/hi/lo tone
Table 2-2. Beeper Indications
A bar code symbol was decoded (if decode beeper
is enabled).
Low battery power.
A format or transmission error has been detected in
a scanned symbol. The data is ignored. This will
occur if a unit is not properly configured. Check
option settings.
Correct entry scanned or correct menu sequence
performed.
Input error, incorrect bar code or "Cancel"
scanned, wrong entry, incorrect bar code
programming sequence; remain in program mode.
Keyboard parameter selected. Enter value using
bar code keypad.
Successful program exit with change in the
parameter setting.
Programming
Indication
2-19
Advertisement
Table of Contents
