Rs-232C; For External Power Operation With Single-Piece Cable; For Direct Host Power Operation - Symbol LS 3603 Product Reference Manual

RS-232C

For external power operation with single-piece cable

Plug the scanner into the appropriate port on the host device.
•
Connect the power supply to the input receptacle located near the host
•
end of the cable.*
Figure 1-1. RS-232C External Power Connection

For direct host power operation:

Plug the scanner directly into the scanner input port of the host device.
•
*Coil cables that terminate in a 25-pin D-type connector have a power receptacle on the side of
the connector assembly.
User's Guide
Typical Host
Connector
1-3