Page 3
If you are replacing a Symbol LS5800-I200TC or NOTE LS5800-I200TN scanner with the Symbol LS7808-SR20007TCR or LS7808-SR2X009SCR, mounting buckets are interchangeable. Configurations The Symbol LS7808 is available in the following configurations. Configuration Features Symbol LS7808-SR20007TCR Standard (tin oxide) glass window; twilight ®...
Section I - Scanning, Layouts, Mounting Active Scan Area The Symbol LS7808 is designed to be installed in the counter, with the face of the scanner flush with the counter top. The figure below shows a typical layout. The dotted area depicts the active scan area and the arrow shows the optimal direction of product flow.
Page 5
Mounting Instructions and EAS Installation Guide Without Auxiliary Scanner and EAS Host Scanner Synapse Cable (Optional) Host Interface Cable Power Supply (optional) With Auxiliary Scanner Host Scanner Synapse Cable (Optional) Host Interface Cable Power Supply...
Page 6
EAS Control Box Power Supply (optional) Installation/Mounting The Symbol LS7808-SR20007TCR and LS7808-SR2X009SCR require a stainless steel in-counter mounting kit (p/n 12-17206-02R) for installation. There are two options for installing this model using the kit, also known as a bucket. The steps for installation options A and B...
Page 7
Mounting Instructions and EAS Installation Guide Option A - Resting on the Counter Top Cut a hole in the counter 6.26 in. (159 mm) square, as shown in the illustration below. 6.26 6.81 in. ±0.06 Counter Hole 173 mm ±1.5 7.91 in.
Page 8
Symbol LS7808 Horizontal Slot Scanner Option B - Flush with the Counter Top On the counter top, measure two concentric squares: an inside square of 6.81 in. (173 mm) and an outside square of 7.91 in. (201 mm), as shown in the illustration below.
Mounting Instructions and EAS Installation Guide Section II - Electronic Article Surveillance (EAS) The Symbol LS7808-SR20007TCR and LS7808-SR2X009SCR include an EAS antenna. The scanner and EAS system can operate independently of each other, or using an exclusive interlock feature. The deactivation range is mapped suitable to the scanning range, so both can be accomplished almost simultaneously.
To activate the EAS system independent of the scanner, or combine the two in an exclusive interlock feature, refer to the appropriate parameters in the Symbol LS7808 Horizontal Slot Scanner Product Reference Guide, p/n 72E-73952-xx. The interlock feature discourages “sweetheart shopping.” These are instances where some customers are favored and not all items are scanned.
EAS interlock port. Plug the EAS interlock cable into the port. Attach the other end to the EAS system. Refer to the Symbol LS7808 Horizontal Slot Scanner Product NOTE Reference Guide, p/n 72E-73952-xx, to scan the proper bar...