LS 3603 Product Reference Guide
RS-232C (Contd)
For battery operation:
Insert a 9-volt battery into the battery box. See the Battery Box
•
Operation section on
Plug the scanner's 9-pin connector at the end of the coil cord into one
•
end of the battery box.
An output cable from the battery box connects the LS 3603 to the
•
RS-232C input device. Connect one end of this cable to the battery box
and the other to the appropriate port on the host device.
1-4
page
1-10.
Figure 1-2. RS-232C Operation