Table of Contents
Advertisement
LS 3603 Product Reference Guide
Aiming
Scan the Entire Symbol
Your scan beam must cross every bar and space on the symbol.
•
The larger the symbol, the farther away you should hold the scanner.
•
Hold the scanner closer for symbols with bars that are close together.
•
A short, high tone beep indicates a good decode.
•
RIGHT
012345
Hold at an Angle
Do not hold the scanner directly over the bar code. In this position, light can
bounce back into the scanner's exit window and prevent a successful decode.
Problems
What If...
See
on page 1-13.
Beeper Definitions
The beeper in the unit provides a variety of messages. See Beeper Indications
beginning on
page 2-19
Programming the System
An LS 3603 is programmed by scanning sequences of bar codes; consult
Chapter 2.
1-8
WRONG
012345
Advertisement
Table of Contents
