Prevents Exposure Compensation With The Quick Control Dial; Enlargement Mode; Add Original Decision Data - Canon EOS-1Ds Software Manual

Personal Function Settings

Prevents exposure compensation with the Quick Control Dial

P.Fn-28
●
The Quick Control Dial cannot be used to set exposure compensation.
●
This prevents exposure compensation from being set accidentally while the AF point is
being selected.

Enlargement mode

P.Fn-30
●
Select which part of an image is enlarged.
●
If you take the shot on the camera with this function [ON], you can enlarge an image.
●
For more information on using this function on the camera, see "P.Fn-30 Enlarging the
image" in the EOS-1Ds Instructions.
●
If you wish to enlarge an image, set P.Fn-30 to [ON] during shooting and playback.
Especially the image shot on the camera without setting P.Fn-30 to [ON] cannot be
enlarged.
●
The image shot on any camera other than the EOS-1Ds cannot be enlarged.

Add original decision data

P.Fn-31
●
The data that shows whether or not the image is the original one can be added to the
image.
●
For the decision of the original image, you will need the special accessory (optional).
●
The original decision data is added to the image that has been shot using
RemoteCapture and saved in the CF card in the camera, but it is not added to the
image that has been transferred into the computer. (➞5-9)
●
The original decision data cannot be added to the JPEG or TIFF image converted
from the RAW image.
If you take the shot on the camera with this function [ON], it takes time to write on the
CF card and the file size is increased to approx. 350 KB.
4-20