Interval Timer Shooting - Canon EOS-1Ds Software Manual

Interval Timer Shooting

This function allows you to specify the interval between shots and the number of shots.
1
Click [ ] (the Detail setting button) in the Shooting window and
select the [Interval Timer Shooting] tab.
\
The [Interval Timer Shooting] tab sheet in the Detailed Settings window appears.
2
Enter the shooting interval and the number of shots, and then
click the [Start] button.
●
You can set a shooting interval
between 5 seconds and 60 minutes
in 1-second increments.
●
You can set up to a maximum of
9999 shots.
\
Interval timer shooting is performed
using the specified interval
between shots and the specified
number of shots.
On some types of computer, if you set a short interval between shots and there is
insufficient time to download and save the images, it may not be possible to take shots
at the specified interval. If this occurs, set a longer interval between shots and take the
shots again.
Depending on the available capacity on your computer's hard disk, the maximum
number of available shots that can be set may be less than 9999. You can check the
number of shots that can be set by referring to the number of available shots shown in
the Shooting window. (➞5-4)
Using RemoteCapture
5-7