Selecting The Model-Specific Processing Mode - Canon EOS-1Ds Software Manual

Selecting the Model-Specific Processing Mode

You can display the RAW image process tool bar for processing RAW images.
By selecting the model of a camera on which images are shot (model-specific processing
mode) from the [Model-specific processing mode] list box, you can process the RAW images
shot on the selected camera.
Select a model-specific processing mode from the [Model-
specific processing mode] list box.
[Common Processing]
The RAW image process tool bar is erased, and you cannot change the settings of RAW
image processing.
[EOS-1DS]
The RAW image process tool bar is displayed, and when you select the RAW images shot
on the EOS-1Ds, you can process them. When a JPEG image is selected, however, the
RAW image process tool bar is grayed out and disabled.
If any images (including RAW or JPEG images) that were shot on a Canon camera
other than the EOS-1Ds are saved on the CF card in the connected camera or on the
selected folder, select [Common Processing] from the [Model-specific processing
mode] list box, or add the model-specific processing mode of the camera on which
images are shot, in the [General Settings] tab sheet (➞3-39) in the [Preferences]
dialog box.
●
See "Processing RAW Images" (➞3-18) for information on how to process RAW
images.
●
If you select any other camera from [Model-specific processing mode] list box, the
RAW image process tool bar for the selected camera is displayed.
3-7