Troubleshooting - Canon EOS-1Ds Software Manual

Troubleshooting

When the "Could not complete installation correctly" or "Communication between the camera
and computer failed" message appears, check the items described below.
Driver installation failed.
● Have you installed the EOS-1Ds TWAIN Driver or EOS-1Ds WIA Driver?
➞ You cannot install the driver correctly unless the EOS-1Ds TWAIN Driver or EOS-1Ds
WIA Driver is already installed. Insert the SOLUTION DISK into the CD-ROM drive and
install the EOS-1Ds TWAIN Driver or EOS-1Ds WIA Driver.
● Is the cable firmly plugged into its socket?
➞ Ensure that the plug on the interface cable is securely plugged into the IEEE1394 port on
your computer. (➞2-2)
● Is your PC's IEEE1394 device operating normally?
Open the [Device Manager] (➞9-5), click
the plus symbol [+] to the left of [1394
Bus Controller] and check that
[XXXXXXX] is displayed.
➞ If [XXXXXXX] is not displayed, plug &
play is not possible using the
IEEE1394 connection because the
IEEE1394 device is not operating
normally. Refer to the user manuals
supplied with your PC for information
on diagnosing and correcting the
problem.
([XXXXXXX] displays the name of your
IEEE1394 device.)
9-2