Canon EOS-1Ds Software Manual page 60

Specifying the Preferences
RAW Image Processing settings tab sheet
6
7
8
9
10
● You can specify the settings shown below in the [RAW Image Processing
settings] tab sheet.
The settings described here are those shown when [EOS-1DS] is selected in the [Model
Name] list box.
5 Select [EOS-1DS].
* The camera models selected in [Registered model-specific processing mode] in the
[General Settings] tab sheet are displayed in the model name list.
6 You should select this option when you want to perform the linear processing on an image.
If you select this option, the tone curve adjustment (➞3-22) cannot be performed.
Since the linear processing is performed on the tone curve adjustment, there is little image
degradation as a result and you can make your own fine adjustments to the chroma in the
retouching software.
7 Clicking this checkbox neutralizes false colors.
8 Clicking this checkbox neutralizes false resolution.
9 Select [8 bits per color channel] or [16 bits per color channel] as the bit rate.
10 Clicking this checkbox ensures that both the RAW and JPEG images are transferred when
you transfer an image in the RAW+JPEG format. If you clear this checkbox, only the RAW
image is transferred.
When you select any other camera in the [Model Name] list box, the available settings
for the respective camera model are displayed.
3-40
11 12
5
13