Canon EOS-1Ds Software Manual page 92

Setting the Parameters
\
The tone curve data is loaded into
the [User-Defined Tone Curve]
dialog box.
6
Check the tone curve.
●
Select the tone curve colors to be
displayed from the [Color Channel]
list box and check the colors.
●
You cannot adjust the tone curve at
this point. Use the procedure in
"Adjusting the Color and Brightness
(Adjust Tone Curve)" (➞3-22) to
adjust the tone curve.
7
Click the [Apply to Camera] button.
\
The tone curve to be registered into the camera is set and the [User-Defined Tone
Curve] dialog box closes.
4-26