Sets The Number Of Shots To Be Bracketed; Changes The Bracketing Sequence For C.fn-09-2/3 To Increased Exposure, Standard Exposure, And Decreased Exposure - Canon EOS-1Ds Software Manual

P.Fn-07 Repeats bracketing during continuous shooting
●
While you hold down the shutter button, bracketing repeats continuously in the currently
selected drive mode.
●
This function is useful when you want to continuously repeat the bracketing sequence.

Sets the number of shots to be bracketed

P.Fn-08
●
Select the number of shots from the list box.
●
The usual 3-frame bracketing is changed to 2-, 3-, 5-, or 7-frame bracketing.
●
In bracketing shots, if you select 5-frame bracketing with 1-stop increment, the bracketing
for the shots is –2, –1, 0, +1 and +2.
●
If you select 5-frame white balance bracketing, the frames are shot at –10, –5, 0, +5 and
+10 mireds.
●
This function is useful for adjusting the range of bracketing.
●
Even when the setting is outside the bracketing level display range, the exposure is
compensated as specified.
●
This function can be used in combination with C.Fn-09-2/3 and P.Fn-09.
Changes the bracketing sequence for C.Fn-09-2/3 to increased
P.Fn-09
exposure, standard exposure, and decreased exposure
● The bracketing sequence when C.Fn-09-2/3 is selected (decreased exposure ➞ standard
exposure ➞ increased exposure) changes to increased exposure ➞ standard exposure
➞ decreased exposure.
●
This function is useful when you want to start the bracketing sequence with a increased
exposed frame.
This function can be used in combination with P.Fn-08.
Personal Function Settings
4-13