Specifying The Preferences - Canon EOS-1Ds Software Manual

Specifying the Preferences

You can use the procedure below to specify the general settings for File Viewer Utility and the
processing method for RAW images.
1
Click the [Preferences] button.
\
The [Preferences] dialog box
appears.
2
Select the [General Settings] tab or the [RAW Image Processing
settings] tab.
\
The selected tab sheet appears.
3
Specify the desired settings and then click the [OK] button.
\
The settings are applied and the [Preferences] dialog box closes to end the
procedure.
1
2
3
4
● You can specify the settings shown below in the [General Settings] tab sheet.
1 When you click the [Transfer Images] button (➞3-4, 3-44), the retouching software (third-
party product) to which the image will be transferred is specified. (➞3-42)
2 Specify the folder for saving the image to be transferred to the retouching software. (➞3-42)
3 Specify the information to be displayed below images. Select [File Name] or [Shooting
Date/Time] in the list box.
4 You can add or erase model-specific processing modes to be displayed in the [Model-
specific processing mode] list box (➞3-3, 3-7). You can add the model-specific processing
mode if you click the checkbox of the camera to be added and click the [OK] button on the
[Select model-specific processing mode] dialog box displayed by clicking the [Select] button.
If you clear the checkbox, the model-specific processing mode is erased.
General Settings tab sheet
3-39