Draytek VIGOR 3300 User Manual page 95

Priority
Source IP
Destination IP
Service Type Status
DiffServ CodePoint Status Displays the setting for DiffServ CodePoint.
Class
Edit
Delete/Delete All
To edit an incoming class filter, please choose one of the radio buttons under Priority and click
Edit. The following page will be shown automatically.
Source IP
Destination IP
Service Type Status
Vigor3300 Series User's Guide
You are allowed to set ten filters. The priority for the filter of
number 1 is the highest; and the priority for number 10 is the
lowest.
Displays the source IP address for the filter.
Displays the destination IP address for the filter.
Displays the service type that you choose for the filter.
Displays the class name that you specified for the
incoming/outgoing class filter.
Click this button to open the edit page for adjusting the settings.
Click this button to delete the selected setting or all settings.
Type the source IP address with subnet mask value to be
applied for this filter.
Type the destination IP address with subnet mask value to be
applied for this filter.
There are three options for you to choose:
Basic – Only the Service Type field is allowed to be configured.
Advanced – The Protocol and Port fields are allowed to be
configured.
None – No field is allowed to be configured.
91