IP Address
Subnet Mask
Status
Start IP
End IP
Primary DNS
When you finished the above required settings, please click Finish. A system reboot page will
appear. Click Apply to activate the static mode configuration.
16
Assign an IP address for the LAN interface.
Assign the subnet mask for the LAN interface.
Click Enable to use DHCP server; click Disable to close
DHCP server; click Relay Agent to activate relay agent
function.
Assign the start IP address of the IP pool that DHCP server can
use for clients in LAN.
Assign the end IP address of the IP pool that DHCP sever can
use for clients in LAN.
Type the IP address for primary DNS.
Vigor3300 Series User's Guide