Draytek VIGOR 3300 User Manual page 152
Vigor 3300 series broadband voip/security/load balance router
Hide thumbs
Also See for VIGOR 3300:
- Quick start manual (33 pages) ,
- Troubleshooting manual (12 pages) ,
- Brochure & specs (4 pages)
Table of Contents
Advertisement
5.
After applying the settings, the web page will be redirected to "reboot" web page. User
can it and continue to configure the Network setting. After finishing Network setting,
you can execute the reboot procedure.
After rebooting, the tagged ports will communicate with 802.1Q tagged devices only.
6.
In the Network setting, type the subnet 192.168.1.0 to LAN. For example, the VLAN5
7.
LAN IP is 192.168.1.1 and the Subnet Mask is 255.255.255.0. Then, users in the
Engineer Department can set IP address from 192.168.1.2 to 192.168.1.254.
8.
In the Network setting, type the subnet 192.168.2.0 to LAN2. For example, the VLAN6
LAN IP is 192.168.2.1 and the Subnet Mask is 255.255.255.0. Then, users in the other
departments can set IP address from 192.168.2.2 to 192.168.2.254.
148
Vigor3300 Series User's Guide
Hide quick links:
Advertisement
Table of Contents
