Draytek VIGOR 3300 User Manual page 78

Max Access
Apply
To delete an item, click the radio button of the item that you want to delete. Then click Delete
on the bottom of the page to remove the entry. A dialog will be prompted for you to ask
confirmation. Click OK.
S N M P
S N M P
In managed network by SNMP protocol, agent will send a specific packet as an attention for
administrator, called Trap. Trap is the only PDU(Protocol data unit) sent by an agent on its
own initiative. It is used to notify the management station of an unusual event that may
demand further attention (like a link down).
Choose SNMP Traps option to see the following page.
Trap Server
Trap Community
Trap server port
Edit
Delete/Delete All
To edit an item, click the radio button of the item that you want to modify. Then click Edit on
the bottom of the page to add a new rule entry or modify an existed rule entry.
74
Select the authority as Read only or Read/Write.
Read only means user only can monitor managed devices.
Read/Write means user can control managed devices including
change the values of variable stored within managed devices.
Click Apply to save this setting and return the previous page.
T r a p s
T r a p s
Display the IP address of the trap server.
Display the community string of the trap server.
Display the port number used for the trap server.
Allow users to edit the selected SNMP traps settings.
Remove one/all the selected SNMP traps settings. A dialog will
be prompted for you to ask confirmation. Click OK.
Vigor3300 Series User's Guide