Draytek VIGOR 3300 User Manual page 47

P P T P
P P T P
The service provider must provide the exact settings for this mode.
User Name
Password
Authentication
Service Name
PPTP Local Address
PPTP Subnet Mask
PPTP Remote Address
Detect Interval
No-Reply Count
Apply
Reset
Vigor3300 Series User's Guide
w i t h a D S L M o d e m
w i t h a D S L M o d e
S e t u p
m S e t u p
Assign a specific valid user name provided by local ISP.
Assign a valid password provided by local ISP.
Select PAP or CHAP protocol for widest compatibility. The
default value is PAP. The password will be encrypted in CHAP
but not in RAP.
Assign a service name required for some ISP services.
Assign a local IP address.
Assign a subnet mask value of IP address.
Assign a remote IP address of PPTP server.
Assign an interval time for detecting if the WAN connection is
on or off.
Assign detecting times to ensure the connection of the WAN.
After passing the times you set in this field and no reply
received by the router, the connection of WAN interface will be
regarded as breaking down.
Click Apply to go back to the WAN Interface Configuration
page. To apply all settings, click Apply on the WAN Interface
Configuration page and reboot your router.
Click this button to clear all the configurations for this page.
43