Draytek VIGOR 3300 User Manual page 61

A d d r e
A d d r e
If you have a group of static IP addresses, then you can use the address-mapping feature to
multiple open ports hosts in the Vigor3300 Series of broadband security routers. The
following session will show you how to setup address-mapping feature.
In the Advanced group, move to NAT option and choose Address Mapping to get the
corresponding page.
Protocol
Public IP
Private IP
Mask
Edit
Delete/Delete All
To edit an item, click the radio button of the item that you want to modify. Then click Edit on
the bottom of the page to add a new rule entry or modify an existed rule entry.
Vigor3300 Series User's Guide
s s M a p p i n g
s s M a p p i n g
Display the protocol used for this address mapping.
Display the public IP address selected for this entry.
Display the private IP set for this address mapping.
Display the subnet mask selected fro this address mapping.
Allow users to edit the selected address mapping settings.
Remove one/all the selected address mapping settings.
57