Star Micronics LC-6211 User Manual page 15

Dot matrix printer
Table of Contents

Advertisement

Set the release lever on the back of the printer to the fanfold position.
Fanfold
Cut-sheet
Set the adjustment lever to the value that matches the thickness of the paper
you are using. The setting for normal paper is 1. Set the lever to a larger
value for thicker paper, or to a smaller value for thinner paper. See the table
on page 27 for details.
Adjustment lever
Unlock the tractor on the left (when viewing the printer from behind) by
pulling its gray lever up, and adjust the position of the left tractor.
Loading paper
Release lever
7
5
3
1
9

Advertisement

Table of Contents
loading

Table of Contents