Setting The Printing Speed; Tear-Off Function - Star Micronics LC-6211 User Manual

Setting the printing speed

Make sure the printer is on-line (ON LINE indicator is lit).
Press the control panel's LINE FEED button to switch between NLQ
(NLQ indicator is lit) and draft (NLQ indicator is not lit) printing.
NLQ printing provides high quality, but is somewhat slower. Draft printing
is quicker, but the quality is not as good as NLQ.

Tear-off function

This procedure feeds fanfold paper to a position where it can be torn off easily.
Make sure the printer is on-line (ON LINE indicator is lit).
Press the control panel's SET/EJECT/PARK button.
Tear off the paper.
When you resume printing, the printer reverse feeds the paper to its former
position.
Setting the printing speed 19