The Ethernet Card Configuration Software - Epson C82324* User Manual

All configuration changes are made using PCONSOLE. This
includes adding or deleting queues, changing queue priorities, or
changing file server assignments. For configuration changes to go
into effect, the print server controlling the Ethernet Card must be
rebooted.
As with all Novell remote printers, the Ethernet Cards print
speed is slower in remote-printer mode than in print server
mode. Remote printer installation is somewhat less convenient
than print server installation.
The main advantage of remote printer mode is that connection to
a file server is not required. This makes remote printer mode
desirable in installations with limited available file server
connections. Each NetWare print server can support up to 16
printers and requires only one file server connection.
The Ethernet
The Ethernet Card comes with the following software:
server or remote printer setup. You must use EPSETUP for the
initial installation, whether installing the Ethernet Card as a
print server or remote printer.
After installation, if the Ethernet Card is operating as a print
server, EPSETUP is the only configuration software necessary
You can use EPSETUP to add or delete queues, change port
configurations, rename the print server, configure the interface
to service queues on other file servers, and other tasks.
Ethernet Cards network operating characteristics.
configuration software
Card
Introduction 7