How The Ethernet Card Works; Using The Ethernet Card As A Print Server - Epson C82324* User Manual

Resetting (or Rebooting) the Ethernet Card causes it to reinitialize
and print a new configuration report. You can reset the
Ethernet Card in three ways:
and back on again
(see Chapter 2)

How the Ethernet Card Works

Epson's Ethernet Interface Card for NetWare operates in the
following Novell NetWare environments: 2.15c or later, or 3.x.
You can configure your Ethernet Card to print jobs in either of two
modes:

Using the Ethernet Card as a Print Server

In print server mode, the Ethernet Card performs all print server
functions. No VAP (Value Added Process) or NLM (NetWare
Loadable Module) is required. The network user sends a print
job from a workstation, the job is moved across the network to
the file server, and it is placed in a print queue. When the
printer is ready, the Ethernet Card print server moves the job
from the print queue to the printer.
Introduction 5