Configuring Scanning Software On Your Computer; Connecting To An Ipv4 Network Automatically - Epson Network Interface Unit User Manual

Network Interface Unit User's Guide
D
Connect the AC adapter and the AC power cord to the Network Interface Unit.
E
Plug in the AC power cord.

Configuring Scanning Software on Your Computer

Connecting to an IPv4 Network Automatically

Note:
To connect automatically, a DHCP server must be correctly configured on the network.
A
Turn on your scanner and the Network Interface Unit.
B
When the home screen ("Scanner is ready") is displayed, press the F setting button.
C
Select Network with the u up and d down buttons, and then press the Z button.
D
Select IPv4 with the u up and d down buttons, and then press the Z button.
Setting Up the Network Interface Unit
10