Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Epson Network Interface Unit
Summary of Contents for Epson Network Interface Unit
-
Page 1: Network Interface Unit
Network Interface Unit User’s Guide NPD4903-01 EN... -
Page 2: Table Of Contents
For Mac OS X......23 Network Interface Unit Specifications..23 Setting Up the Network Interface Unit General. -
Page 3: Copyright And Trademarks
Neither is any liability assumed for damages resulting from the use of the information contained herein. Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this product or third parties for damages, losses, costs, or expenses incurred by the purchaser or third parties as a result of: accident, misuse, or abuse of this product or unauthorized modifications, repairs, or alterations to this product. -
Page 4: Safety Instructions
❏ Do not spill liquid onto the Network Interface Unit. ❏ Except as specifically explained in this User’s Guide, do not attempt to service the Network Interface Unit yourself. ❏ Place the product on a flat, stable surface that extends beyond the base of the product in all directions. If you place the product by the wall, leave more than 10 cm between the back of the product and the wall. -
Page 5: Restrictions On Copying
Network Interface Unit User's Guide Safety Instructions ❏ If you use an extension cord with the product, make sure the total ampere rating of the devices plugged into the extension cord does not exceed the cord’s ampere rating. Also, make sure the total ampere rating of all devices plugged into the wall outlet does not exceed the wall outlet’s ampere rating. - Page 6 Network Interface Unit User's Guide Safety Instructions Products can be misused by improperly copying copyrighted materials. Unless acting on the advice of a knowledgeable attorney, be responsible and respectful by obtaining the permission of the copyright holder before copying published material.
-
Page 7: Getting To Know Your Network Interface Unit
Connect this to the Network Interface Unit. AC power cord Connect this to the AC adapter, and then plug it in. USB cable Connect this to the Network Interface Unit and the scanner. Setup Guide The paper manual for this product. -
Page 8: Unit Parts
Network Interface Unit User's Guide Getting to Know Your Network Interface Unit Unit parts Front view Side view Turns the product on or off. P power button F setting button Make product and network settings, or perform maintenance. & Reset button Resets the panel to the initial screen. -
Page 9: Setting Up The Network Interface Unit
Connect a network cable to the Network Interface Unit. Note: ❏ You must use a category 5e or higher shielded twisted-pair cable to connect the Network Interface Unit to prevent malfunction. ❏ The network cable is not supplied with the product. -
Page 10: Configuring Scanning Software On Your Computer
Network Interface Unit User's Guide Setting Up the Network Interface Unit Connect the AC adapter and the AC power cord to the Network Interface Unit. Plug in the AC power cord. Configuring Scanning Software on Your Computer Connecting to an IPv4 Network Automatically Note: To connect automatically, a DHCP server must be correctly configured on the network. -
Page 11: Connecting To An Ipv4 Network Manually
“Using EpsonNet Config” on page 13 Connecting to an IPv4 Network Manually Turn on your scanner and the Network Interface Unit. When the home screen ("Scanner is ready") is displayed, press the F setting button. Select Network with the u up and d down buttons, and then press the Z button. -
Page 12: Connecting To An Ipv6 Network
“Using EpsonNet Config” on page 13 Connecting to an IPv6 Network Turn on your scanner and the Network Interface Unit. When the home screen ("Scanner is ready") is displayed, press the F setting button. Select Network with the u up and d down buttons, and then press the Z button. -
Page 13: Using Epsonnet Config
“Using EpsonNet Config” on page 13 Using EpsonNet Config Web-based EpsonNet Config is software that is stored on the Network Interface Unit. You can launch the software from a computer on the network using a Web browser and so on. You can make network interface settings (TCP/IP and so on) and scanner settings (various checks and settings). - Page 14 Network Interface Unit User's Guide Setting Up the Network Interface Unit Supported Web Browsers Web Browser Version Microsoft Internet Explorer IE8.0 or later Mozilla FireFox Ver 3.5 or later Safari Ver 4.0 or later Google Chrome Ver 4.0 or later Opera Ver 10.0 or later...
-
Page 15: Scanning An Image
❏ You must log on to a Computer Administrator account. Note: You need to install the latest firmware for the Network Interface Unit before scanning. Go to the Epson home page to download the Epson Firmware Updater for the Network Interface Unit. -
Page 16: Scanning Over A Network
You must set the IP address for your Network Interface Unit before you can scan using it. Note for Windows: You need to install the latest Document Capture Pro before scanning. Go to the Epson home page to download the latest Document Capture Pro. -
Page 17: Scanning From The Network Interface Unit (For Windows)
Set up a job in advance. U See the user’s guide of the scanner for more details. Turn on your scanner, the Network Interface Unit and the client computer. Place your original(s) in the input tray. Press the Z button on the unit. -
Page 18: About The Control Panel
Select Yes and then press the Z button to return the settings in the Display menu to their default values. Energy Saving menu Note: When connecting the Network Interface Unit, the Power Off Timer and Sleep settings are given priority over settings made in EPSON Scan Settings. Item Description... -
Page 19: Network Menu
Network Interface Unit User's Guide About the Control Panel Network menu Note: This is not displayed if a password is set for this unit in EpsonNet Config. Item Description IPv4 Select whether the IP address is set automatically or manually. If Manual is selected, you can set the value for IP address, IP subnet mask, and IP default gateway. -
Page 20: Troubleshooting
Problems Indicated by Messages on the LCD Panel or Status Lights You can check the status of the scanner and the Network Interface Unit from messages on the LCD panel and the status lights. Clear the error according to the message displayed. -
Page 21: The Lcd Screen Is Not Displayed Even When The Scanner Is On
❏ Check that the network cable is connected securely. “Connecting the Network Interface Unit to a Network” on page 9 ❏ Turn off the scanner and make sure the Network Interface Unit is properly connected to your scanner and connected to the network. -
Page 22: Cannot Automatically Connect To The Network
❏ Check that the IP address is set correctly. U See the user’s guide of the scanner for more details. ❏ Check that there are several network interface unit (scanner) on the network. On your computer, recognise the scanner using MAC address of this product. -
Page 23: Technical Specifications
OS X is not supported. Note: Epson Scan does not support the UNIX File System (UFS) for Mac OS X. You must install Epson Scan on a disk or in a partition that does not use UFS. Network Interface Unit Specifications Note: Specifications are subject to change without notice. -
Page 24: Mechanical
Network Interface Unit User's Guide Technical Specifications Mechanical Dimensions Height: 75 mm (2.9 inches) Width: 186 mm (7.3 inches) Depth: 102 mm (4.0 inches) Weight Approx. 380 g (About 0.83 lb) Electrical Product Power consumption Operating: Maximum 7.5 W Rated input voltage... -
Page 25: Interfaces
Network Interface Unit User's Guide Technical Specifications Interfaces Scanner Interface USB via USB cable Network Interface 10BASE-T/100BASE-TX/1000BASE-T Standard and Approvals Product U.S. model: FCC Part 15 Subpart B Class B European model: EMC Directive 2004/108/EC EN55022 Class B EN55024 EN61000-3-2...