Chapter 1
Installing the Ethernet Card
This chapter explains how to install the Ethernet Interface Card
for NetWare in your printer. This chapter also shows how to
use the EPSETUP utility to install the interface on your
network
Hardware Installation
This section describes Ethernet Card hardware installation. It
explains the following tasks:
Please read these sections and perform the procedures described
in the above order. Ethernet Card must be installed in the printer,
connected to the network, and the printer turned on before you
set up the software.
Your Ethernet Interface Card for NetWare package includes:
You must provide:
Ethernet I0BASE-T)
Installing the Ethernet Card
1-1