Epson Printers Serviced By The Ethernet Card - Epson C82324* User Manual

The Ethernet Card software consists of two programs used to
install and configure the Ethernet Card on the network:
EPSETUP is an easy-to-use menu-driven installation and
configuration utility.
EPCONFIG is a command-line utility used to configure the
Ethernet Card's more advanced features

Epson printers serviced by the Ethernet Card

Epson's Ethernet Card for NetWare can be installed in the
optional interface slot in the back of the following Epson
printers:
ActionLaser II
EPL-4000
EPL-4300
EPL-8000
You may be able to install this interface card in other Epson printer
models. Check you printer's user's guide for a list of optional
interfaces that can be installed in your printer, or check with your
local Epson dealer to see if you can install the Ethernet Interface
Card for NetWare in your printer.
Caution:
You cannot use this Ethernet Interface card if the model C82605*
EPSON PostScript Card is installed in your printer.
2 Introduction
ActionLaser 1000
EPL-4100
EPL-5000
EPL-8100
ActionLaser 1500
EPL-4200
EPL-5200