Epson C82324* User Manual page 44

Ethernet interface card for netware
Table of Contents

Advertisement

Jobs Do not Print
I sent a job to a queue serviced by my the Ethernet Card print server,
but it didn't print, What's wrong?
Check that the Ethernet Cards host printer is turned on, the card
is connected to the network, the printer is on line, and it has
paper.
Check the Ethernet Card's configuration. Has the queue been
mapped to the Ethernet Cards printer? Is the file server where
the queue resides included in the Ethernet Card's service list?
Check your printer's user's guide to see if you need to make any
adjustments using the printer's control panel.
Is the data you are sending in the correct format for the printer
mode? If not, either send the job to a queue serviced by a printer
that accepts the data as formatted or, from within your
application, select a printer driver appropriate to the target printer
before queuing the job.
If using an Epson PostScript card, specify no banner when
printing. For NPRINT and CAPTURE, "nb" specifies no banner
page.
If you have defined forms using Novell utilities, make sure that
each job's initial form is number 0. The Ethernet Card supports
form change commands during print jobs, but the starting form
must always be form 0.
Troubleshooting 3-5

Advertisement

Table of Contents
loading

This manual is also suitable for:

C823241 (ethernet interface for netware

Table of Contents