Attach the network cable to the appropriate connector on the
interface, as shown in the following diagram.
Using the Epson PostScript Card
Note the following important points when installing or using the
Ethernet Card in a printer in which you are using the Epson
PostScript card:
minute for the printer to initialize before using EPSETUP or
EPCONFIG to install or configure the Ethernet Card. The
Ethernet Card may not respond if the initialization is not
complete.
EPSETUP.
Ethernet Card Software Setup
This section describes using the EPSETUP utility to perform the
following:
1-4
Installing the Ethernet Card
Thin coaxial
I
10BASE-T
\
0