Lenovo ThinkServer TD100 Installation Manual page 82

Table 5. Abbreviated list of POST error codes (continued)
v Follow the suggested actions in the order in which they are listed in the Action column until the problem
is solved.
v See the parts listing in the Hardware Maintenance Manual to determine which components are customer
replaceable units (CRU) and which components are field replaceable units (FRU).
v If an action step is preceded by "(Trained service technician only)," that step must be performed only by a
trained service technician.
Error code
1762
178x
66
ThinkServer TD100 and TD100x Types 4203, 4204, 4205, 4206, 6398, 6399, 6419, and 6429: Installation Guide
Description
Fixed disk configuration error.
Fixed disk error.
Note: x is the drive that has the error.
Action
1. Run the Configuration/Setup Utility
program and load the default settings.
2. Reseat the following components:
a. SATA or SAS cable
b. Reseat the hard disk drive
c. (Trained service technician only)
Reseat the system board.
d. Replace the components listed in
step 2 one at a time, in the order
shown, restarting the server each
time.
1. Run the hard disk drive diagnostic tests
on drive x (see "Running the diagnostic
programs" in the Hardware Maintenance
Manual).
2. Reseat the following components,
depending on the server model:
v Hot-swap and non-hot-swap models:
a. Hard disk drive x
b. Hard disk drive x cable
c. Optional adapter cable
d. SAS/SATA backplane
v Simple-swap models:
a. Hard disk drive x
b. Hard disk drive x cable
c. Optional adapter cable
d. SATA backplate
3. Replace the following components one at
a time, depending on the server model,
in the order shown, restarting the server
each time:
v Hot-swap and non-hot-swap models:
a. Hard disk drive x
b. Hard disk drive cable
c. Optional adapter cable
d. SAS/SATA backplane
v Simple-swap models:
a. Hard disk drive x
b. Hard disk drive x cable
c. SATA backplate
4. (Trained service technician only) Replace
the system board.