Lenovo ThinkServer TD100 Installation Manual page 51

8. Carefully grasp the adapter 1 by the top edge or upper corners, and align it
with the expansion slot guides; then, press the adapter firmly into the
expansion slot. Move the adapter directly from the static-protective package to
the expansion slot.
Note: If any adapters in the server are large or have heavy cables attached to
them, you can remove the rear adapter-retention bracket 1 and
secure all of the adapters with expansion-slot screws (the
expansion-slot screws are located on the side of the optical drive cage).
1
Rear adapter retention bracket
2
Adapter
3
Front adapter retention bracket
9. Connect required cables to the adapter. Route cables so that they do not block
the flow of air from the fans.
10. Rotate the front and rear adapter-retention brackets to the closed (locked)
position.
Chapter 2. Installing options
35