Using Thinkserver Easymanage Software; Installing Thinkserver Easymanage Software - Lenovo ThinkServer TD100 Installation Manual

2. Follow the instructions on the screen until you get to the Start option screen.
3. When the Start option screen is displayed, do the following:
4. Follow the remaining instructions on the screen to complete the procedure.

Using ThinkServer EasyManage software

ThinkServer EasyManage Core Server provides centralized hardware and software
inventory management and secure automated system management through a
single console. The ThinkServer EasyManage Agent enables other computers and
servers to be managed by the centralized console.
You can install the ThinkServer EasyManage Core Server program from the
ThinkServer EasyManage CD or you can download and install the program from
http://www.lenovo.com/support. After one instance of the ThinkServer EasyManage
Core Server has been installed, you can use the ThinkServer EasyManage Agent
installer to install the agent on other servers and clients on the network.
Also, the ThinkServer EasyStartup program provides an option to install these
products as part of the operating system installation process.

Installing ThinkServer EasyManage software

Before installing ThinkServer EasyManage software on your server, your
environment must meet the following requirements:
v The server has Internet access to obtain prerequisites and to activate the
v The server has a static IP address.
v The server is not a domain controller. However, it is recommended to have the
v The account that you use to log in and to install the Core Server has
To ensure a clean, working installation of ThinkServer EasyManage software, use
the following installation order:
1. Install Microsoft Windows
2. Install the following Windows Components: "Installing IIS on the Core Server" on
3. Use Windows Update to install all available critical updates.
4. Install Microsoft.NET Framework 2.0 or higher.
5. Install Web Services Enhancements (WSE) 2.0 SP3 for Microsoft .NET
a. Insert the USB device or diskette that contains the response file.
b. Select Install the operating system using a preexisting response file.
c. Click OK.
software after the installation is complete.
server join a domain.
Administrator privileges on the server with full read/writer access. Ideally, this
account is also a Domain Administrator account. This account will be used to
create the initial administrator-level account used to log in to the ThinkServer
EasyManage console.
page 52, "Installing ASP.NET on the Core Server" on page 52, and "Installing
SNMP on the Core Server" on page 52.
®
(LANDesk Process Manager only).
Note: This specific version is required.
®
Server 2003 Service Pack 1.
Chapter 4. Configuring the server
51