Lenovo ThinkServer TD100 Installation Manual page 61

The following illustration shows the connectors on the rear of the non-hot-swap
server models.
1
Power cord connectors
2
Mouse connector
3
Keyboard connector
4
Serial 1 (COM 1) connector
5
Parallel connector
6
Video connector
Power-cord connector
Connect the power cord to this connector.
AC power LED
This green LED provides status information about the power supply. During
typical operation, both the ac and dc power LEDs are lit. For any other
combination of LEDs, see the Hardware Maintenance Manual on the
ThinkServer Documentation DVD.
DC power LED
This green LED provides status information about the power supply. During
typical operation, both the ac and dc power LEDs are lit. For any other
combination of LEDs, see the Hardware Maintenance Manual on the
ThinkServer Documentation DVD.
Mouse connector
Connect a mouse device to this connector.
Keyboard connector
Connect a PS/2 keyboard to this connector.
7
USB 3 and 4 connectors
8
(RJ45) Ethernet 10/100/1000
connector
9
(RJ45) Ethernet 10/100 (for Remote
Supervisor Adapter II SlimLine)
connector
10
NMI button
11
Serial 2 (COM 2) connector
Chapter 3. Server controls, LEDs, and power
45