Installing A Dimm - HP ProLiant BL280c - G6 Server User Manual

Air baffle configuration for all other DIMMs
Remove the two air flow covers from the top of the air baffle.
1.
Install the air flow covers on each end of the air baffle.
2.

Installing a DIMM

CAUTION:
air baffle, drive blanks, and access panel must be installed when the server is powered up.
Power down the server blade (on page 13).
1.
Remove the server blade (on page 14).
2.
To avoid damage to the hard drives, memory, and other system components, the
Hardware options installation 37