Lockstep Memory Population Guidelines - HP ProLiant BL280c - G6 Server User Manual

Lockstep Memory population guidelines

For Lockstep memory mode configurations, observe the following guidelines:
•
Observe the general DIMM slot population guidelines (on page 33).
•
Always install DIMMs in channels 1 and 2 for each installed processor.
•
Do not install DIMMs in channel 3 for any processor.
•
DIMM configuration on channel 1 and channel 2 of a processor must be identical.
•
In multi-processor configurations, each processor must have a valid Lockstep Memory configuration.
•
In multi-processor configurations, each processor may have a different valid Lockstep Memory
configuration.
Single-processor Lockstep population order
For Lockstep memory mode configurations with a single processor, populate the DIMM slots in the
following order:
•
RDIMM
First: A and B
o
Next: D and E
o
Do not populate slots C or F.
o
•
UDIMM
First: A and B
o
Last: D and E
o
Do not populate slots C or F.
o
After installing the DIMMs, use RBSU to configure the system for Lockstep memory support
lockstep memory" on page 62).
Multi-processor Lockstep population order
For Lockstep memory mode configurations with multiple processors, populate the DIMM slots for each
processor in the following order:
•
RDIMM
First: A and B
o
Next: D and E
o
Do not populate slots C or F.
o
•
UDIMM
First: A and B
o
Last: D and E
o
Do not populate slots C or F.
o
After installing the DIMMs, use RBSU to configure the system for Lockstep memory support
lockstep memory" on page 62).
("Configuring
("Configuring
Hardware options installation 35