Installing The Trusted Platform Module Board - HP ProLiant BL280c - G6 Server User Manual

•
Any attempt to remove an installed TPM from the system board breaks or disfigures the TPM security
rivet. Upon locating a broken or disfigured rivet on an installed TPM, administrators should consider
the system compromised and take appropriate measures to ensure the integrity of the system data.
•
When using BitLocker™, always retain the recovery key/password. The recovery key/password is
required to enter Recovery Mode after BitLocker™ detects a possible compromise of system integrity.
•
HP is not liable for blocked data access caused by improper TPM use. For operating instructions, see
the encryption technology feature documentation provided by the operating system.

Installing the Trusted Platform Module board

WARNING:
internal system components to cool before touching them.
Power down the server blade (on page 13).
1.
Remove the server blade (on page 14).
2.
Place the server blade on a flat, level work surface.
3.
Remove the access panel (on page 15).
4.
Remove all mezzanine cards
5.
CAUTION:
the TPM security rivet. Upon locating a broken or disfigured rivet on an installed TPM,
administrators should consider the system compromised and take appropriate measures to
ensure the integrity of the system data.
Install the TPM board. Press down on the connector to seat the board
6.
on page 9).
To reduce the risk of personal injury from hot surfaces, allow the drives and the
("Mezzanine card
Any attempt to remove an installed TPM from the system board breaks or disfigures
option" on page 38).
("System board
Hardware options installation 46
components"